AMIT IOG700 Series

High Speed IIoT Telemetry

IOG7000x501 is high speed cellular based remote terminal unit (RTU) for IIoT telemetry of SCADA system. With both Giga Ethernet and 4G Cat.4 or Cat.6, it can afford high speed device or sub network. it is nongeographic limit and can install at instant. With two Ethernet, it can connect to two network devices. It can also configure one port as fail over EtherWAN for reliable dualWAN scenario. With serial and I/O interfaces, it can connect to more legacy serial devices, sensors and relay output to control device. MicroSD storage based data logging function can store serial and D/I data for nonbroken or scheduling transfer. Smart event handling allow remote management and can initiate event to trigger action for automatic control purpose.

Reliable & Secure Transfer

Besides Cellular WAN, there is also configurable EtherWAN for failover function. It can guarantee reliable transfer. Capable of various VPN technologies, it can build tunnel with famous  VPN server for scenario requirement. Built in both IPv4/IPv6 and routing  protocol are compatible with most ISP network. Cellular toolkit simplifies setting, utilizes ISP service and monitoring data usage. Easy setting. Friendly setting with Web UI for basic, CLI and Script window for advance requirement. BuiltinTR069 can work with AMITNMS  and SNMP work with popular network tools for multisite management.

Intelligent Protocol Conversion

Builtin both Ethernet and serial interface, it can connect not only IP based equipment but also acquired legacy serial devices. It is Modbus gateway connect SCADA server and remote machine to perform intelligent protocol conversion between Modbus/TCP and Modbus/RTU/ASCII. It can also be slave when SCADA server do configuration or Modbus master to access device when perform data logging function.

NonBroken Data Logging

There are serial or D/I interface for IIoT telemetry requirement. To keep record all data when transaction no matter connection online or broken is helpful for Administrator’s further data analysis and statistics. Multimode data logging function can work for scenario requirement. It can work for nonbroken and scheduling transfer.

Smart Event Handling

According to predefined rule lists, Administrator can change RTU setting or trigger event action remotely by SMS, SNMP trap. When there is new input or behavior change of RTU, it will be new event to trigger action, and also can notify administrator or related devices by SMS or SNMP traps. It will be useful function to work as automatic process when setting one event to trigger consecutive events for special purpose within RTU or more remote devices.